Tag Archives: button

Kumihimo tricks and tips

15 May

The lady at the bead shop told us in the spring of 2012 that we were about a year ahead of the kumihimo trend. When we first started making bracelets with buttons we could only find one other person incorporating a button in their kumihimo design and the way they finished off the bracelet was completely different. Well, it looks like the lady at the bead store was prophetic! We are amazed at the kumihimo and button creations showing up on Google and Etsy these days.

Now that the kumihimo trend has caught on, I thought it would be nice to share some tips and tricks we learned along the way.

1. If you use Magatama beads, you will need a bit more C-Lon then just seed beads. Adjust the length of your cord for larger or smaller beads accordingly. The larger the bead, the more cord you need.
2. We usually measure one strand of C-Lon or S-Lon by measuring it from our hand to shoulder with arm extended.
3. I like to measure all eight strands at the same time and then cut once, keeping four strands doubled (to make eight strands). This way I can thread the strand through the button holes and have eight strands ready to go.
4. At the beginning, don’t braid more than 1/8″ or your button will stick out. You want the button to lay as flat as possible on the wrist for comfort.
5. Be sure to keep your cord taught on the loom. This will keep your design uniform.
5. If you need to take a break, do it when you have three cords at one spot. Then you will know right where to pick back up.
6. When finishing, use a good glue and be sure your knot is secure.
7. If you run out of cording, you are toast. You can always add beads but not cording.
8. Remember your cording will show, so match it to the beads or button.
9. If you miss a bead and don’t find it until after the piece is done, you can add a bead by threading cording and a bead on a needle and working it into the missed space. Just run your cord through a few beads on either side and secure with a hidden knot, like in sewing.
10. Don’t make your finished loop too long. If you do (we did this many times at first), go back and re-tie your finish knot, cut off the excess, and be sure the loop is just barely big enough to fit around the button. Otherwise your bracelet will look odd.

Hope these tips and tricks make your kumihimo experience a bit easier. Enjoy!

Beth
View our creations on Etsy

20130515-152030.jpg

Large button lengthens Kumihimo bracelet

3 Jan

As you can see from our Kumihomo bracelets, we primarily use buttons for our closure method. Sometimes we find a fantastic large button.

Two cautions.

First, check to see if the button holes are large enough to get eight strands of cord through. There’s nothing so frustrating as selecting your Magatama beads, cord and button to match and then finding out you can’t use the button because the cord is to thick for the button holes.

Second, remember the larger the button, the longer your closure loop will be to fit around the button. So if you had a 3/4″button, for instance, your closure loop would be a bit larger than 3/4″ in diameter (which measures about an inch and three quarters of kumihimo braiding at the end). Not only does that lengthen your bracelet, it also makes the large closure loop a focal point. Since the loop is unadorned (no beads), the color of the cord is front and center. Also, be sure to reduce the number of Magatama beads or you will have a really long bracelet once it is clasped and the slack is hanging from the button.

To view our Kumihimo bracelets…CAAZandeffect
We hope these tips help you with your button selection for your Kumihimo bracelets.

20130103-124056.jpg

Kumihimo bracelet with Magatama beads cost per bracelet

11 Nov

We were recently discussing our Kumihimo bracelets with Magatama beads and the cost per bracelet.

I thought I would share a perspective of what is takes to create one of our CAAZ and effect Kumihimo bracelets with Magatama seed beads. First we need supplies; a beading mat, braiding disk, plastic bobbins, beading needle, scissors, hanging weight, and book with pattern suggestions.

Next we need materials. We typically use Magatama beads and C-Lon cord. A tube of long Magatama beads costs anywhere from $5 to $12 a tube. We usually use from three to five colors. C-Lon cord runs about $4 per spool and we match the color of our cord to the bead, using several colors per bracelet.

Once we have counted out the beads for each of the eight strands, string the beads, and wind the cord on the bobbins, it’s time to braid. It takes about two hours to complete the braiding process. Once the braid is complete it’s on to finish the piece. This includes a button, large bead, and often a charm. Each of these items need to be purchased adding to the production cost.

We sell our Kumihimo bracelets with Magatama beads for $48. Unfortunately not a lot of profit. It’s a good thing we love the creative process!

Feel free to view our products at CAAZandeffect

20121111-074933.jpg

Kumihimo and color

29 Oct

Deciding which colors of beads to use in a kumihimo jewelry piece is sometimes the toughest part. There are various patterns to follow to get your piece to look just right. Sometimes a piece is one color, sometimes two and so on. If using multiple glass seed bead colors for an eight strand piece, try selecting one or two colors that are out of the ordinary. That will make the piece “pop”. For example, in making an eight strand bracelet, we sometimes use several coordinating colors of Magatama seed beads and then one or two vibrant colors of another bead, to stand out. Notice the rust and blue in this otherwise tan and white kumihimo bracelet. We’ve finished this one with an Italian bronze tone button. To see more of our bracelet creations visit us at CAAZandeffect

20121029-113857.jpg